The Swift Montreal Lodge is a 40 × 20 twin-section model with two documented plan options, two bedrooms or three. Its design uses a defined hallway at the entrance. That makes the Montreal a useful comparison if you want a place to put coats, shoes or pet equipment before you reach the main lounge. Consider how that entry compares with the other models in the mobile-home listings.
On this page
Swift Montreal Lodge — how does a third bedroom change the living space?
Ask for the dimensioned drawings of both plans and compare the kitchen aisle, wardrobe space and circulation near the main bathroom. For other layouts, use our guide to room layout in wider homes. Match the drawing to the actual floor plan in the quote.
Check the entry and bathroom equipment
Inspect the drop zone near the exterior door and compare it with how you come into the home. The design documentation describes a main bath with a shower over it and a separate en-suite shower. Ask whether both are present in your chosen configuration and check approach space beside the bath.
Confirm how the sections will be joined onsite
Plan for where both transport sections arrive, where the equipment works and who completes the joins, steps and utility work. Compare that scope with the guide to setup and delivery charges. Ask what the home estimate includes and which work is charged separately.
Request the right Montreal plan before comparing quotes
Get the Montreal quote for the plan you selected with your destination ZIP, bedroom count and any site-access limits. Request a floor plan and separate amounts for transport, placement and assembly.
Swift Montreal Lodge hallway and entry viewing checklist
Start at the exterior door and walk through the hallway to the first shared room. Decide where coats, shoes or pet gear would go, then see whether anyone could pass with a bag while those things are there. Ask where the openings for any storage come off the hallway and whether furniture would extend into the route. If you plan your placement around the front entrance, measure the door and intended landing at the same time.
Which bathroom fittings should I verify in the two plans?
Ask for the two- and three-bedroom drawings with the fixtures labeled. The documentation describes a main bath with a shower above it and an en-suite shower room. Confirm whether your selected layout uses those fixtures and look at the clear area beside the bath and the path between the guest bed and bathroom. Keep both drawings and mark the configuration on your quote for the Swift Montreal Lodge so the selected options stay with it.
Compare the Swift Montreal Lodge guest room and workspace
If the third bedroom would mainly hold work or storage equipment, put the dimensions of those items on the plan and mark a path into the room while the door is open. Compare what would have to move out of the shared living area in each configuration. Then see which plan gives you usable space during a normal week, including the times when you have guests. Ask which furniture positions are flexible and which are determined by fitted storage or appliances.
Clarify how two units reach the same position
Ask which transport section reaches the site first and what equipment needs room next to the planned location. Mark the approach from the gate, the surface those loads will rest on and any overhead obstruction the carrier needs to know about. Request in-transit dimensions for both sections. Have the installer explain what work joins them and what exterior and site preparation you would arrange before delivery.
Request a version-specific Montreal figure
Send your preferred bedroom plan, ZIP and entry orientation together. Ask for the home and included equipment to be shown before the costs for transport, placement and work after arrival. Confirm how much room the installer needs outside the entry and who provides the final steps. Keep your exact Swift Montreal Lodge equipment list, room plan and site description on the same record when comparing quotes. That will help you see which changes affect the home and which are caused by access or placement at your location.
Compare with two other homes
Keep the Swift Montreal Lodge at the top of your comparison and review these two options for a different room arrangement, travel size or cost. The published fields describe the configurations in this catalog; ask for the exact plan if a room or dimension determines your choice.
Swift Edmonton Lodge
The Swift Edmonton Lodge has a 40 × 20 ft listed body, 2 bathrooms in the listing. The recorded footprints match. For two homes in the same envelope, compare the usable space at the doors and which end contains the main living room. Request a walkthrough from the main entrance to the furthest room to see whether furniture or doors interrupt that route.
Swift Toronto Lodge
The Swift Toronto Lodge has a 43 × 20 ft listed body, 2 bedrooms, and 2 bathrooms in the listing. The listed bodies have the same width, and the comparable model is 3 ft longer. Ask which room gains or gives up that length before you choose. Request a walkthrough from the main entrance to the furthest room to see whether furniture or doors interrupt that route.
Confirm access from road to final position
When requesting an estimate for the Swift Montreal Lodge, photograph the turn off the road and record the tightest part of the driveway. Ask the mover to check gates, branches and changes in slope with the full travel width. Get separate answers for arrival at the property and placement in the final position.
Send a sketch with the preferred position of the front and side doors. Ask which access steps and landings are part of the quote. Those details help you reserve enough space around the home without paying to change a finished pad or utility run.